Introducing Geothermal System -
A
geothermal system collects energy from the earth through a series of
interconnected piping and a heat transfer fluid flowing through the
pipes. This implies, the more piping and the greater the diameter, the
more connection with soil and the more energy the geothermal system is
capable of transferring the energy. However, the amount of piping needed
for a geothermal kit is fully dependent on the size of the heat pump
you need as well as the soil conditions of the soil. Hence, your DIY
geothermal installation kits will have the proper sizing calculated only
for you depending upon your needs and location.
Geothermal
systems take full advantage of the sun likewise any other solar
systems. But they do this job indirectly by harvesting the solar energy
that has been absorbed by the earth throughout the year. Even in the
cold climates, only the top of the earth’s surface freezes. Below the
upper surface, there is availability of plentiful heat energy; which
will be pulled out through geothermal systems and transferred into homes
and businesses.
In
fact, there are four common varieties of geothermal systems available
these days. If you are choosing one, remember that it’s fully dependent
upon the local topography and the availability of land of water space.
However, the most common and simplest one to install is the horizontal
ground loop or the well loop. Keep in mind that, water loops are most
popular ones but only if you have access to a lake. Here are top four
types of geothermal systems available for businesses and homes:
4 Common Geothermal Heat Pumps -
Horizontal Loop -
Where
the space is adequate enough, the sealed piping loop of Horizontal
systems can be buried in trenches up to 3 to 6 feet deep.
Vertical Loop -
Where
the space is of limited amount, the sealed piping loop can be used in
small holes ranging from 150 to 400 feet deep that are installed using a
well drilling rig.
Pond Loop -
When
a water body is available nearby, the Pond Loop geothermal heat pump’s
sealed piping loop can be submerged under the surface.
Well water -
Well
Water geothermal systems are used where groundwater is of sufficient
amount and of better quality so that the well water can be utilized
directly instead of the sealed piping loop.
Conclusion -
Are
you looking for a supplier providing geothermal systems? 123 Zero
Energy specializes in offeribf quality solar and geothermal kits in
order to build a Zero Energy Home. Our solar thermal and geothermal
packaged systems and kits are utilized for homeowners, builders and
contractors for building a Zero Energy Home. If you are seeking for a
complete home energy solution, consider buying geothermal systems on 123 Zero Energy and get greater efficiency, durability of solar powered systems for more years to come!
For more queries on geothermal packages, browse through our website today or feel free to contact online!
